Mallinckrodt NPB-190 Návod k obsluze stáhnout pdf (Strana 26)

Sensors and Accessories

WARNING: Tissue damage can be caused by incorrect

application or duration of use of an SpO2 sensor. Inspect the

sensor site as directed in the sensor directions for use.

High ambient light sources such as surgical lights (especially

those with a xenon light source), bilirubin lamps, fluorescent

lights, infrared heating lamps, and direct sunlight can interfere

with the performance of an SpO

2 sensor. To prevent interference

from ambient light, ensure that the sensor is properly applied, and

cover the sensor site with opaque material.

Note: Failure to take this precaution in high ambient light

conditions may result in inaccurate measurements.

If patient movement presents a problem, try one or more of the

following remedies to correct the problem.

• verify that the sensor is properly and securely applied

• move the sensor to a less active site

• use an adhesive sensor that tolerates some patient motion

• use a new sensor with fresh adhesive backing

If poor perfusion affects performance, consider using the

Oxisensor R-15 sensor; it obtains measurements from the nasal

septal anterior ethmoid artery, an artery supplied by the internal

carotid. This sensor may obtain measurements when peripheral

perfusion is relatively poor. For low peripheral perfusion,

consider using the Nellcor RS-10 sensor, which is applied to the

forehead or temple. These are sites that may be spared during

peripheral vasoconstriction.

WALL MOUNT PLATE

A wall mount plate is available by contacting Mallinckrodt

Technical Services or your local Mallinckrodt representative.

The wall mount plate fits standard, commercially available GCX

Poly-mount brackets, and is used to securely mount the monitor

to a wall.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 86 87

Žádné komentáře

Mallinckrodt NPB-190 Návod k obsluze Strana 26