Mallinckrodt NPB-190 Návod k obsluze Strana 64

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 110
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 63
Start-Up and Use
56
WARNING: Do not silence the N-395 audible alarm or
decrease its volume if patient safety could be compromised.
The SpaceLabs monitor provides both audible and visual alarm
indications. Silencing the N-395 alarm will also silence the
SpaceLabs monitor alarms. The monitors must be able to sound
an audible alarm in order to maintain patient safety.
Marquette Communications
The N-395 sends SpO
2, pulse rate, and alarm status data to the
Marquette monitor.
The Marquette monitor requires an Octanet interface module
to interface with the N-395 pulse oximeter. The interface
module comes with an interface cable, GE Marquette part
number 417961-033, that connects to the Nellcor interface
cable.
The RS-232 hardwire interface cable has a DB-15 connector for
the N-395 and the applicable connector for the Marquette
Octanet interface module cable. Nellcor cable part number
902254 is recommended for this interface.
Note: Spare parts for the N-395 are listed on the Internet,
confirm the cable part number before ordering a cable.
The Internet address is:
http://mallinckrodt.com/respiratory/resp/Serv_Supp/Apa
rtweb/main/PartAcceMenu.html.
Corrupt data will be indicated by a Communications Error
displayed on the Marquette monitor. The Marquette monitor
will detect corrupt data in less than 7 seconds.
When the N-395 is in the Marquette mode of operation the
interface baud rate must be set to 9,600 bits per second.
Pressing the SETUP softkey, then the NEXT softkey, and then
the COMM softkey to select BAUD. Use the ADJUST UP or
ADJUST DOWN buttons to select the correct baud rate.
The GE Marquette monitor only sounds audible alarms.
Silencing the N-395 audible alarm has no effect on the GE
Marquette monitor sounding an alarm.
Zobrazit stránku 63
1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 109 110

Komentáře k této Příručce

Žádné komentáře