Mallinckrodt NPB-190 Návod k obsluze stáhnout pdf (Strana 95)

DATA PORT PROTOCOL

Overview

Connecting to the Data Port

Baud Rate

Setting Data Port Protocol

Real-Time Display Format

Trend Data Printout (ASCII Mode)

Trend Data Printout (Graph Mode)

Nurse Call

Analog Outputs

OVERVIEW

Patient data can be obtained through the data port on the back of

the N-395 by connecting it to an attached PC or serial printer.

When connecting the N-395 to a printer or PC, verify proper

operation before clinical use. Both the N-395 and the printer or

PC must be connected to a grounded AC outlet. The N-395

protocol setting must be in the ASCII mode as described in the

“COMM” paragraph of the Start-Up and Use section.

Any printer or PC connected to the monitor’s data port must be

certified according to IEC Standard 950. All combinations of

equipment must be in compliance with IEC Standard 601-1-1

systems requirements. Anyone who connects a printer or PC to

the data output port configures a medical system and is therefore

responsible for ensuring that the system complies with the

requirements of system standard IEC Standard 601-1-1 and the

electromagnetic compatibility system standard IEC Standard

601-1-2.

CONNECTING TO THE DATA PORT

The N-395 data port may be connected to the printer or PC by

using a cable terminated with an AMP connector (AMP part

number 747538-1), ferrule (AMP part number 1-747579-2), and

compatible pins (AMP part number 66570-2). The cable should

be no more than 25 feet (7.6 meters) in length. The external ITE

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 109 110

Žádné komentáře

Mallinckrodt NPB-190 Návod k obsluze Strana 95