Mallinckrodt NPB-190 Návod k obsluze stáhnout pdf (Strana 66)

Start-Up and Use

Press the NEXT softkey to access the LANG softkey. After

pressing the LANG softkey, use the ADJUST UP/DOWN

Buttons to select English, French, German, Italian, Spanish,

Dutch, or Portuguese.

If the language is changed and EXIT is pressed (or a 10-second

timeout occurs), the monitor begins displaying data in the

selected language.

NCALL

The NCALL softkey provides the capability of setting the alarm

voltage at a normally high (NORM +) or normally low

(NORM -). Refer to the “Nurse Call” heading of Data Port

Protocol for a more thorough explanation of these settings. The

nurse call feature is also discussed later in this section.

ANALOG

The ANALOG softkey provides the capability to produce

variable calibrating voltages to calibrate instruments such as a

chart recorder. Refer to the “Analog Outputs” heading of Data

Port Protocol for a more thorough explanation of these settings.

LIGHT

The LIGHT softkey turns the backlight on or off. When the

backlight is off, pressing any softkey turns the backlight on.

Also, the CONTRAST and ALARM SILENCE keys will turn

the backlight on. Any alarm will turn the backlight on. Turning

the backlight off conserves battery power.

Default Settings

The N-395 is shipped with factory default settings (Table 6 and

Table 7). Authorized technical personnel using the procedures

described in the N-395 service manual can change default

settings.

Note: Factory default settings are constants that cannot be

changed without re-compiling software.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 109 110

Žádné komentáře

Mallinckrodt NPB-190 Návod k obsluze Strana 66