Mallinckrodt NPB-190 Návod k obsluze stáhnout pdf (Strana 97)

Data Port Protocol

The pin layouts (as viewed from the rear panel of the N-395) are

illustrated in Figure 22. The conductive shell is connected to

earth ground when connected to a PC or printer.

Figure 22: Data Port Pin Layout

Pins 2, 3, and 5 provide data in RS-232 format.

Pins 1, 4, 9, and 12 provide data in RS-422 format. TxD+ and

TxD- are the differential transmit data pair. RxD+ and RxD- are

the differential receive pair.

No hardware flow control is used. However, in the ASCII mode

XON/XOFF flow control is supported.

BAUD RATE

Pressing the SETUP softkey and then the COMM softkey can

change the baud rate. Use the ADJUST UP/DOWN Buttons to

select a baud rate of 2400, 9600, or 19200, depending on the

capabilities of the attached equipment.

SETTING DATA PORT PROTOCOL

The available data port protocols are:

• ASCII

• OXINET

• CLINICAL

• GRAPH

• AGILENT – Agilent (HP) communications

• SPACELBS – SpaceLabs communications

• MARQ – GE Marquette communications

• DATEX – Datex-Ohmeda AS/3 communications

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 109 110

Žádné komentáře

Mallinckrodt NPB-190 Návod k obsluze Strana 97